BackForwardInstrument:  L-Band Radar 

Instrument details
Acronym L-Band Radar
Full name Soil Moisture Active-Passive L-Band radar
Purpose Soil moisture in the roots region
Short description
  • L-Band SAR at 1.26 GHz
  • Polarisation VV, HH and HV for the SAR.
  • Single antenna of 6 m diameter
Background

New development, re-designed after the previous "Hydros" project.

Scanning Technique

Conical scanning, 14.6 rpm, or 30 km/scan; incidence angle 40°, swath 1000 km

Resolution 30 km (unprocessed, real aperture), 3 km (processed)
Coverage / Cycle Global coverage in 1.5 days
Mass 356 kg Power 448 W Data Rate 40 Mbps

 

Providing Agency NASA
Instrument Maturity Flown on an R&D satellite
Utilization Period: 2015 to 2029
Last update: 2026-11-16
Detailed characteristics
Satellites this instrument is flying on

Note: a red tag indicates satellites no longer operational, a green tag indicates operational satellites, a blue tag indicates future satellites

Instrument classification
  • Earth observation instrument
  • Active and radio-occultation sensor
  • Imaging radar (SAR)
WIGOS Subcomponents
  • Subcomponent 1
  • SAR imagers and altimeters
  • Multi-polarization SAR
  • SAR imager
Mission objectives
Primary mission objectives
  • Sea surface salinity
  • Soil moisture (in the roots region)
  • Soil moisture at surface
Evaluation of Measurements

The following list indicates which measurements can typically be retrieved from this category of instrument. To see a full Gap Analysis by Variable, click on the respective variable.

Note: table can be sorted by clicking on the column headers
Note: * Primary mission objective.
VariableRelevance for measuring this variableOperational limitationsExplanation
Biomass2 - very highIndex only.. Infrequent coverage.L-band sensitive to total biomass
Fire fractional cover3 - highInfrequent coverage.L-band SAR. High resolution, for fire boundary detection
Fraction of vegetated land5 - marginalNo specific limitation.L-band SAR
Glacier cover1 - primaryLong time for mapping.L-band SAR for accurate boundary detection
Glacier motion2 - very highInfrequent coverage.L-band SAR for interferometry between images taken at time intervals
Glacier topography2 - very highLong time for mapping.L-band SAR for interferometry between images taken at time intervals
Ice sheet topography2 - very highLong time for mapping.L-band SAR for interferometry between images taken at time intervals
Land cover5 - marginalNo specific limitation.L-band SAR
Land surface topography2 - very highLong time for mapping.L-band SAR for interferometry between images taken at time intervals
Oil spill cover2 - very highInfrequent coverage.L-band SAR
Sea-ice concentration1 - primaryNo specific limitation.L-band SAR
Sea-ice freeboard5 - marginalNo specific limitation.L-band SAR. Sea ice elevation measured by interferometry
Sea-ice thickness5 - marginalChange detection only.L-band SAR. Sea ice elevation measured by interferometry. Thickness inferred by ice model
Sea-ice type3 - highNo specific limitation.L-band SAR. Type interpreted as age/roughness
Snow water equivalent4 - fairChange detection only.. Infrequent coverage.L-band SAR. SWE is retrieved by grigging with data from ground networks
Soil moisture (in the roots region)*2 - very highInfrequent coverage.L-band SAR
Soil moisture at surface*2 - very highInfrequent coverage.L-band SAR
Soil type5 - marginalNo specific limitation.L-band SAR
Vegetation type5 - marginalNo specific limitation.L-band SAR