BackForwardInstrument:  A-DCS 

Instrument details
Acronym A-DCS
Full name Advanced Data Collection System (also called "Argos-3")
Purpose Data collection from in-situ Data Collection Platforms, with location capability
Short description

Transponder of messages from self-timed Data Collection Platforms, and location of the platform. Receiver frequency: 401.65 MHz with margins from - 70 to + 40 kHz (110 kHz bandwith). DCP bit rate: basic: 400 bps; maximum 4800 bps

Monitoring and calibration information here

Background

Successor of DCS/2 (flown from NOAA-15 to NOAA-18) with the additional capability of sending messages to the Data Collection Platform (at 466 MHz) for the purpose of changing its configuration

Scanning Technique

N/A

Resolution N/A
Coverage / Cycle N/A
Mass 30 kg Power 72 W Data Rate 400 to 4800 bps

 

Providing Agency CNES
Instrument Maturity Flown on operational programme
Utilization Period: 2007 to 2048
Last update: 2024-09-23
Detailed characteristics
Satellites this instrument is flying on

Note: a red tag indicates satellites no longer operational, a green tag indicates operational satellites, a blue tag indicates future satellites

Instrument classification
  • Other payload component
  • Data Collection System
WIGOS Subcomponents No WIGOS subcomponents have been defined.
Mission objectives
No mission objectives have been defined.
Evaluation of Measurements

The following list indicates which measurements can typically be retrieved from this category of instrument. To see a full Gap Analysis by Variable, click on the respective variable.

Note: table can be sorted by clicking on the column headers
Note: * Primary mission objective.